Bumpers are important for protecting your Jeep from fender benders and adding style and personality. They also provide a convenient spot for mounting off-road lights or a winch. The Rugged Ridge Venator Front bumper is a high-strength steel construction with D-Ring recovery tabs and integrated fog light mounts. He also chose to add a Warn Zeon 10s Platinum winch, which takes up quite a bit of space in the lower air dam area. Visit Website for more information.

Remove the Lower Air Dam

Whether you’re upgrading your Jeep bumper for added off-road protection, for accessory mounts or to improve your approach and departure angles, you’ll need to weigh several factors. You’ll need to consider your budget, your style preferences and your vehicle’s needs.

Jeep bumpers come in a variety of designs and styles to suit your off-road needs. Many are made from heavy steel, which provides a greater level of protection than factory bumpers. You can also choose from aluminum bumpers, which are a lighter option and don’t rust. However, it’s important to remember that the heavier the bumper, the more it will impact your gas mileage and handling.

The best Jeep bumpers are designed for off road use and have features like recovery points, so you can hook them up to a winch or other recovery gear. These accessories are crucial if you’re planning to explore remote and less-traveled terrain. A winch bumper also gives you the ability to recover your Jeep without relying on strangers or other drivers, which is a huge safety advantage.

Some Jeep bumpers are designed to be used as a rock crawler bumper and are narrower than traditional front bumpers. These are a great choice for Jeep owners who love to rock climb and need to be able to easily navigate obstacles that the tires can’t rise over. These bumpers also have holes or slots that allow you to install off-road lighting, which increases your visibility on trails.

Another popular type of Jeep bumper is the stinger bumper, which is similar to a tubular bumper but has a hoop that extends out the front of the Jeep. This bumper is useful for reducing the risk of roof rollovers, which are one of the most common types of Jeep accidents. Stinger bumpers do this by forcing the Jeep to land on its side, which is a lot safer than if it rolls over the roof.

A bumper should not only protect your Jeep from obstacles but also be aesthetically pleasing. There are bumpers available with different finishes, from classic to bold. Look for a bumper that complements your Jeep’s aesthetic and matches your off-road lighting and other accessories. You may also want to consider adding a grille guard to your bumper to keep your engine and radiator protected from debris. The best grille guards are made from heavy-duty steel and feature a smooth powder coating, which makes them resistant to scratching.

Disconnect the Fog Lights

If you spend a lot of time on the trail, it’s inevitable that some of your Jeep’s exterior components will get scratched up. Fortunately, the process of removing your bumper to touch it up or install a new one is surprisingly easy. This guide will show you how to do it in a few simple steps.

First, you’ll need to remove the fog lights from your factory front bumper. This is easily done by removing the six rubber grommets holding the plastic shield underneath the front of your Jeep. Then, simply unplug the fog light wiring harness by squeezing the plastic tab and pulling it straight off.

After removing the fog lights, it’s important to prep your new bumper before beginning installation. This is because the bumper you’re using will have different mounts than your stock bumper, so you’ll need to align the bolts and the mounting bracket before you can begin. You’ll also need to ensure the new bumper is compatible with your winch and that it can handle the weight of your winch cable. Luckily, Mile Marker offers a wide selection of Jeep bumper mounts that are guaranteed to be compatible with your vehicle, and they’re all available at affordable prices.

Now that you’ve prepped your new bumper, it’s time to install it on your Jeep. This is a fairly straightforward process that should take less than 10 minutes. To begin, you’ll need to remove the bumper cover from your Jeep. You’ll find at least 20 sheet metal screws around the perimeter, as well as a few push style fasteners, and these will need to be removed before you can begin.

Once the plastic frame cover has been removed, you’ll need to remove the 10mm bolts that hold the headlights in place. You can use a 10mm socket and ratchet to do this, and you’ll want to make sure you disconnect the wiring connector as well.

Next, you’ll need to replace the grille with your new bumper. You’ll be able to do this by unscrewing the four screws on its corners with your Phillips screwdriver. Finally, you’ll need to mount your bumper and reconnect the wiring to your fog lights, as well as test the headlight switch and turn signal switch. Once this is complete, you’re ready to hit the trails in style!

Remove the Old Bumper

Bumpers are a vital safety feature on a vehicle. They prevent damage to the body, wheels and tires when hitting rocks or obstacles on a rough terrain. They also help to protect the driver and passengers while four-wheeling or driving long stretches of highway. Wear and tear takes its toll on lots of the exterior components of a Jeep, but there are some that take a beating more than others, like the front bumper. If yours is damaged, it may be time to upgrade to a new one.

The good news is that replacing a bumper is relatively simple and can be done at home, even without the use of a lift. The most important thing is to remove all of the screws and clips holding the old bumper in place. If you have a set of jack stands, it is recommended to use them to raise the vehicle enough to reach underneath and unscrew any bolts on the chassis that hold the bumper. Make sure you disconnect the license plate light and distance control sensor (if equipped).

Once the lower air dam is removed, there should be space to reach behind the bumper and depress the tab on each fog light to unscrew and disconnect the wire harness. It is also a good idea to remove the two plastic gap trim pieces on each side of the front bumper.

Next, look under the bumper for three 10mm bolts that hold the bumper cover to the front cross member. There are also a couple of push pin connectors that hold the bumper cover to the body, these can be removed by using a flat blade screwdriver and popping them up.

Finally, there are a pair of rivits that attach the front bumper to the metal core and can be removed by removing the nut at the bottom of the rivit. Once these are removed, the old bumper should slide right off of the vehicle.

This video from @Sheepjeep shows how to install a Bestop JK Front bumper and winch kit. It does take him a bit longer than expected (5 hours total including the winch), but he goes over every step in detail and shows how easy it is to mount a new bumper to a stock Jeep.

Remove the Wire Loom

If you have a Jeep Wrangler JK that is already equipped with a bumper and you want to install a winch mount on it, there are some steps you need to take. These steps will ensure that the winch mount is installed correctly, so you won’t have to worry about your safety while off-roading or driving on the highway.

First, you will need to remove the lower air dam. This is done by removing the four plastic clips at the bottom of the bumper. This can be done using a plastic panel tool. If there are any clips that refuse to budge, they can be drilled out. Then, the bumper can be pulled off.

Once the old bumper is removed, there will be space to reach the wiring harness for the fog lights. There is a tab that needs to be depressed on each fog light wire in order to disconnect it. There are also four retaining clips that secure the wire loom to the backside of the bumper. By reaching under the bumper, these can be unscrewed to allow you to pull the loom off.

Once you have disconnected the wiring, it is a good idea to install a pre-made wire harness for your Jeep. This will make it much easier to work on in the future, and you won’t have to worry about any loose wires hanging around. A wire harness kit can be found at most automotive stores, and they come in a variety of different kits for many models of vehicles. The most popular kits for Jeeps are from Painless Wiring, and they are available in both universal and Jeep model specific versions. The kits are easy to follow and will give your Jeep a professional look once the installation is complete. This will increase the value of your Jeep and make it easier to sell in the future.